Changing The Area Shot Mode - Eclipse CD7000 Owner's Manual

12
Press the [ENTER] button.
The selected file will be saved.
"READING" is
reading has finished, [Completed] will
appear on the display and then it will
return to the display for selecting the
function mode.
appears if the system is unable to read
the file.
ATTENTION
<When using a Memory Stick>
• Data downloaded from the E-iSERV (web
site) is saved to folders created in the
Memory Stick as shown below.
MSFTEN
AREA
XXXXXXXX.ast
• Files that can be imported into your main
unit are created
downloaded from E-iSERV.
• All of searched route map and guidance
information etc.
automatically created files.
<When using a CD-R>
• The main unit can only import files from CD-
R that have been written in root directories.
XXXXXXXX.ast
• Disc formats that may be used are as
follows:
•CD-ROM (MODE1)
•CD-ROM (MODE2_FORM1)
*CD-ROMs written in MODE2_FORM2 cannot
be read.
• The file names can be changed using 8
alphameric characters (space cannot be
used.)
displayed. When
[FILE ERROR]
User creation
Automatic creation
File extension
automatically when
are stored in these
Automatic creation
File extension
How to operate the Area Shot function (U.S.A./CANADA only)
CAUTION
• Do not turn the ignition switch or power
to the main unit ON or OFF (or remove
the front panel of the main unit) while
data reading is in progress. Data
reading will be interrupted and data may
be damaged.
• Only the [VOL] button can be operated
while the system is reading data.

Changing the Area Shot mode

Press the [MUTE] button for more
1
than one second.
Guidance maps, intersection street
names and turning directions are
displayed on the screen. Pressing and
holding the [MUTE] button (for 1
second or more) a second time closes
the Area Shot mode.
ATTENTION
• Pressing any button other than [SELECT],
[SCREEN] and [RTN] displays the audio
control screen
operation. If no button is pressed within 6
seconds, the guidance screen returns.
• If the audio control screen is displayed
while the Area Shot mode is ON, pressing
the [RTN], [SELECT] or [SCREEN] buttons
displays the guidance screen.
CAUTION
• Modes may not be changed if guidance
data has not been imported properly.
• Do not look at the screen while driving.
enabling audio system
X
55