Eclipse CD7000 Owner's Manual page 73

2
Press the [ENTER] button.
The crossover
activated.
Press the [ENTER]
3
crossover adjustment channel.
Each time the button is pressed, the
channel changes in the following
order.
When the 4-speaker layout is selected:
Front o Rear o Woofer o Front o MMM
When the 3 way speaker layout is
selected:
Hi-HPF o Mid-LPF o Mid-HPF o Low-
LPF o Hi-HPF o MMM
Press the [SELECT] (Right/Left)
4
button to select
frequency.
When the button is pressed, the
frequency changes in the following
order.
When the 4-speaker layout is selected:
Front/Rear:
63 Hz l 80 Hz l 100 Hz l 125 Hz l
160 Hz l 200 Hz l 250 Hz l 315 Hz
l 400 Hz l 500 Hz l 630 Hz l
800 Hz l 1kHz l 1.25kHz l 1.6 kHz
l 2 kHz l 2.5 kHz l 3.15 kHz l
4kHz l 5kHz l 6.3 kHz l 8kHz l
10 kHz
Woofer:
20 Hz l 25 Hz l 31.5 Hz l 40 Hz l
50 Hz l 63 Hz l 80 Hz l 100 Hz l
125 Hz l 160Hz l 200 Hz
setting mode is
button to
the cut-off
How to operate the Sound Adjustment Mode
When the 3 way speaker layout is
selected:
M-LPF/Hi:
200 Hz l 250 Hz l 315 Hz l 400 Hz
l 500 Hz l 630 Hz l 800 Hz l
1kHz l 1.25kHz l 1.6 kHz l 2 kHz
l 2.5 kHz l 3.15 kHz l 4kHz l
5kHz l 6.3 kHz l 8kHz l 10 kHz
M-HPF/Low:
20 Hz l 25 Hz l 31.5 Hz l 40 Hz
l 50 Hz l 63 Hz l 80 Hz l 100 Hz
l 125 Hz l 160Hz l 200 Hz
Press the [SELECT] (Upper/ Lower)
5
button to set the slope.
The slope can be set to "PASS", "6dB/
oct", "12dB/oct", "18dB/oct" or "24dB/
oct".
Upper: The
gentle.
Lower: The slope becomes steeper.
Repeat the operations in steps to 3
6
to 5 change the settings for each
channel.
Press the [CUSTOM] or [RTN]
7
button to exit sound adjustment
mode.
slope becomes more
XII
73