How To Cancel The Key Cd; How To Change The Key Cd; How To Resume Normal Operation (Esn Security Lock Out) - Eclipse CD7000 Owner's Manual

Various Settings
4 Insert the CD into the slot.
A [SEC] message appears, then the
Key CD is ejected.
Press the
5
button.
The front panel closes.
ATTENTION
• If there is a problem with the inserted CD,
an [ERR] message will appear for two
seconds and the CD will be ejected.
Reinsert the ejected CD.
• If a CD causes the [ERR] message to
appear twice in a row, a [CHANGE]
message will appear for two seconds. Try
another CD.
• Copy Protected CD and MP3/WMA CD-ROM
cannot be programmed for Key CD security.
• The Security indicator will flash whenever
the vehicle's ignition is switched off.

How to cancel the Key CD

Check that the main unit is in
1
standby.
Press and hold the button [6], then
2
[SCREEN] button, and hold both
for more than one second.
A [SEC] message appears, then in two
seconds it will change to [DISC].
Press the
3
button.
The front panel opens; The CD7000 is
now ready for your Key CD in the CD
slot.
ATTENTION
If a CD has already been inserted, a [SEC]
message appears, and then the front panel
opens and the CD is ejected.
44
[ (OPEN/EJECT)]
[ (OPEN/EJECT)]
4
Insert your Key CD into the slot.
A [CANCEL] message appears, then
the Key CD is ejected.
The Key CD is cancelled.
ATTENTION
• This process cancels the protection for ESN
main unit.
• If power to the
disconnected, then reconnected, a Key CD
will not need to be inserted in order to
return the main unit to normal operation.
• Inserting a CD other than the Key CD will
not cancel the protection. Instead, the
display [ERR] for two seconds, then the
normal CD playback mode will activate.
Press the [
5
button.
The front panel closes.

How to change the Key CD

1
First, cancel the existing Key CD.
Refer to "How to cancel the Key CD".
2
Next, program a new Key CD.
Refer to "How to program the Key
CD".
How to resume normal operation
(ESN security lock out)
If power is disconnected while ESN security is
active (a Key
operation is disabled until power is restored
and the main unit unlocked. Follow this
procedure to resume normal operation.
ESN main unit
(OPEN/CLOSE)]
CD was programmed),
is