If You Have A Question; Displayed Information (For Troubleshooting) - Eclipse CD7000 Owner's Manual

Cd/ms multi-source receiver with fully motorized organic el display
Hide thumbs Also See for ECLIPSE CD7000:
Table of Contents

Advertisement

Available languages

Available languages

If you have a question:

[RESET] button
First check the item mentioned below before attempting to troubleshoot problems.
CAUTION
If a problem occurs, for instance when the main unit does not respond to any button presses, or the
display doesn't work correctly, press the [RESET] button using a paper clip or similar item.
Pressing the [RESET] button will delete all the entries from memory. The settings will return to
those made at the factory prior to shipment.

Displayed information (for troubleshooting)

The information listed in the chart below is displayed to show the status of the CD, Memory Stick player,
Area Shot function, Sirius Radio and CD changer. Refer to the chart for the appropriate action.
Information Contents
INFO 1
INFO 2
INFO 3
INFO 5
INFO 6
INFO 7
LOAD
CD PLAYER SHUTTER IS
OPEN
NO DISC LOADED IN THE
MAGAZINE
DISCS ARE DIRTY OR
DAMAGED
CD PLAYER AND CD
CHANGER FAILS
MECHANICALLY
WHEN THE CD PLAYER
AND CD CHANGER
INTERNAL TEMPERATURE
IS HIGH (TO PROTECT
PICKUP UNIT)
AN INTERNAL POWER
SUPPLY FAILURE IS
OCCURRING

If you have a question:

Explanation and remedial action to take
Close the shutter.
There is no disc in the magazine or player. Load a
disc in the magazine. (Load a music disc.)
The loaded disc is dirty or upside down. Check it for
proper orientation and verify it is clean.
• The CD player and CD changer is inoperative for
some reason. Go through the magazine removal
procedure.
• If a magazine fails to eject, have your dealer fix
problem.
• The temperature in the CD player and CD changer
is too high for operation. Wait till it cools down.
• Resume playing after the "High temperature
sensed and CD stopped" display disappears. If the
CD still cannot play, have your dealer repair it.
• Turn the ACC off once before turning it on once
again to resume the operation.
• If this condition persists, please contact your
dealer.
CD changer is in the process of verifying the
presence of CDs after a magazine has been inserted
into the CD changer.
XIX
XX
103

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents