Multi-Harmonizer Settings (Harmonizer); Non-Fader Settings (Nf Setting); Non-Fader Phase Settings (Phase) - Eclipse CD7000 Owner's Manual

Various Settings
Multi-harmonizer settings
(Harmonizer)
This function uses harmonic synthesis to restore
the high-frequency component that is lost as a
result of the compression process so that fresher
sound can be obtained during MP3 /WMA,
Memory Stick (ATRAC3) playback.
Press the [SELECT] (Upper/ Lower)
1
button to select the Harmonizer.
2
Press the [ENTER] button.
The harmonizer setting
activated.
Press the [SELECT] (Upper/ Lower)
3
button to select the setting item.
When the button is pressed, the
setting item changes in the following
order and the
highlighted.
Hi o Low o OFF o Hi o MMM
Hi: High effectiveness
Low: Low effectiveness
4
Press the [ENTER] button.
The selected settings will take effect.
Press the [CUSTOM] or [RTN]
5
button to exit sound adjustment
mode.
74
mode is
selected item is

Non-fader settings (NF Setting)

• Non-fader phase (Phase)
The merging of sound between the front and
rear speakers and the woofer can be
improved by selecting the phase. Switch the
phase to a phase which lets the speakers
combine without any disharmony.
• Non-Fader Output (Output)
Non-Fader Output can be stereo or mono.
Select the method that matches the output
method for the sub-woofer system that is
connected to the main unit.
Press the [SELECT] (Upper/ Lower)
1
button to select the NF Setting.
The selected item is highlighted.
2
Press the [ENTER] button.
The time non-fader setting mode is
activated.

Non-fader phase settings (Phase)

Press the [SELECT] (Upper) button
1
to select the Phase.
The selected item is highlighted.
Press the [SELECT] (Right/Left)
2
button to
Reverse.
Right: Reverse
Left: Normal
Press the [CUSTOM] or [RTN]
3
button to exit sound adjustment
mode.
select Normal or