Setting Spectrum Analyzer Sensitivity (S/A Sensitivity); Setting The Steering Switch Function (U.s.a. Only); Reading Steering Switch Data (U.s.a. Only) - Eclipse CD7000 Owner's Manual

Setting spectrum analyzer
sensitivity (S/A Sensitivity)
The sensitivity of the spectrum analyzer display
can be changed.
Press the [SELECT] (Upper/ Lower)
1
button to select the S/A Sensitivity.
2
Press the [ENTER] button.
The spectrum analyzer sensitivity
setting mode is activated.
Press the [SELECT] (Upper/ Lower)
3
button to select the spectrum
analyzer sensitivity.
When the button is pressed, the
spectrum analyzer sensitivity changes
in the following order.
Low l Mid l Hi l Low l MMM
4
Press the [ENTER] button.
The selected settings will take effect.
Press the [CUSTOM] or [RTN]
5
button to exit function mode.
Setting the steering switch
function (U.S.A. only)
The vehicle's factory loaded steering switch
becomes inoperable when the CD7000 is
installed. The ECLIPSE web site (E-iSERV)
provides software that enables steering switch
operation even with the installation of the main
unit. Import this software into your CD7000.
For details, contact the store from which you
purchased your main unit. Depending on your
vehicle's make and model, material downloaded
from the web site may not be compatible with
your steering switch. Consult the store from
which you purchased your CD7000 about
compatibility and set-up procedures. Software for
the steering switch can be downloaded and
imported into the main unit as follows:
Making changes with Function Mode
Access The ECLIPSE web site.
(URL: http://www.e-iserv.jp)
Download the steering switch software following
instructions provided on the ECLIPSE web site (E-
iSERV). (Because material available on the website
may not be compatible with the steering switches
found on some automobiles, make sure to check
the website for details about compatibility.)
Copy the downloaded software to CD-R or a
Memory Stick.
Import into the main unit.
The steering switch can be operated.
Reading steering switch data
(U.S.A. only)
The steering switch
downloaded from E-iSERV (web site) to a
Memory Stick or CD-R can be loaded into the
main unit and save there.
Press the [SELECT] (Upper/Lower)
1
button to select the Steering SW
Data.
2
Press the [ENTER] button.
The spectrum steering switch setting
mode is activated.
Press the [SELECT] (Upper/Lower)
3
button to select media types.
4
Press the [ENTER] button.
"INSERT DISC" or "INSERT Memory
Stick" will be displayed and the panel
will open automatically.
Insert the CD-R or Memory Stick to
5
be used for saving the steering
switch data.
Press the
6
button to close the front panel.
data that has been
[ (OPEN/EJECT)]
XIV
87