Tone Settings - Canon IMAGERUNNER 2016 Reference Manual

Tone Settings

You can set whether to sound audible tones. The following tones sound at the
following times:
•
Entry Tone:
•
Error Tone:
•
TX (Transmission) Job Done Tone: When a fax transmission completes
•
RX (Reception) Job Done Tone:
•
Scan Done Tone:
•
Print Done Tone:
NOTE
•
The default setting is 'ON' for the Entry Tone and Error Tone, and 'ERROR ONLY' for the
TX Job Done, RX Job Done, Scan Done, and Print Done Tones. The tone volume is set
to '1' for every tone.
•
The maximum tone volume is '3'.
•
The volume can be set only when the Fax function is available.
1
Press [Additional Functions] ➞ [
Additional
Functions
<COMMON SETTINGS> appears ➞ press [OK].
If necessary, see the screen shots in steps 1 and 2 of "Initial Function at Power
ON," on p. 5-15.
OK
The <COMMON SETTINGS> menu appears.
2
Press [
press [OK].
COMMON SETTINGS
OK
3.AUDIBLE TONES
The <AUDIBLE TONE> menu appears.
When pressing keys on the control panel
When a malfunction occurs (e.g., paper jam or
operational error)
successfully
When a fax reception completes successfully
When scanning is complete
When printing is complete
] until <AUDIBLE TONES> appears ➞
] or [
] or [ ] until
AUDIBLE TONES
1.ENTRY TONE
Specifying Common Settings
5
5-19