Displaying A Feeder Error Message Prompt - Canon IMAGERUNNER 2016 Reference Manual

Displaying a Feeder Error Message Prompt

You can use the Feeder Error Message mode to prompt you to clean the scanning
area when the machine detects streaks or stains. If the feeder is not clean, the
machine will scan and print dust and grime on the output.
IMPORTANT
The ADF DIRTY ERROR mode is available only if the optional Feeder (DADF-P1) is
attached to the machine.
NOTE
The default setting is 'DISPLAY'.
1
Additional
Functions
5
OK
2
OK
3
OK
4
Stop
5-36 Specifying Common Settings
Press [Additional Functions] ➞ [
<COMMON SETTINGS> appears ➞ press [OK].
If necessary, see the screen shots in steps 1 and 2 of "Initial Function at Power
ON," on p. 5-15.
The <COMMON SETTINGS> menu appears.
Press [ ] or [
press [OK].
COMMON SETTINGS
13.ADF DIRTY ERROR
The <ADF DIRTY ERROR> menu appears.
Press [ ] or [
DISPLAY> ➞ press [OK].
If you select <DISPLAY>, the screen prompting you to clean the scanning area
appears when the machine detects streaks or stains.
ADF DIRTY ERROR
DISPLAY
The selected mode is set.
Press [Stop] to return to the Standby display.
] or [
] until <ADF DIRTY ERROR> appears ➞
ADF DIRTY ERROR
] to select <DISPLAY> or <DO NOT
COMMON SETTINGS
14.INIT. COMMON SET.
] until
DISPLAY