Canon IMAGERUNNER 2016 Reference Manual page 140

3
OK
4
OK
5
5
OK
6
Stop
5-24 Specifying Common Settings
Press [ ] or [
or <OTHER> ➞ press [OK].
<FAX> appears only if the optional Super G3 FAX Board is installed.
AUTO DRAWER SELCT
1.COPY
NOTE
<OTHER> is used for specifying the paper source for printing reports.
Press [ ] or [
paper source appears ➞ press [OK].
COPY
5.STACK BYPASS
Press [ ] or [
Repeat steps 4 and 5 to make settings for the other paper sources.
STACK BYPASS
Details of each item are shown below.
<ON>: The paper source is eligible for APS/ADS.
<OFF>: The paper source is ineligible for APS/ADS.
The APS/ADS is set.
NOTE
Regardless of the stack bypass setting, you cannot select 'OFF' for all of the paper
sources at the same time. At least one of the paper sources, besides the stack
bypass must be set to 'ON'.
Press [Stop] to return to the Standby display.
] to select <COPY>, <PRINTER>, <FAX>,
COPY
1.DRAWER 1
] until <STACK BYPASS> or the desired
STACK BYPASS
] to select <ON> or <OFF> ➞ press [OK].
AUTO DRAWER SELCT
OFF 2.PRINTER
OFF