Output Tray Designation - Canon IMAGERUNNER 2016 Reference Manual

Output Tray Designation

You can designate the machine's output trays to be used for specific functions. The
output trays are indicated by Tray A and Tray B.
Options Attached
Finisher-U1 and
Additional Finisher Tray-C1
5
Inner 2 Way Tray-E1
IMPORTANT
The Tray Designation mode is available only if the optional Finisher-U1 and Additional
Finisher Tray-C1 or Inner 2 Way Tray-E1 are attached to the machine.
NOTE
•
If heavyweight paper or transparencies are loaded in the stack bypass, they will be output
to Tray B regardless of the Tray Designation settings. Plain paper, however, can be output
to either Tray A or B.
•
If you set both trays to 'ON' for a single function, Tray B has the priority.
•
The same output tray can be designated for multiple functions.
•
The default setting is 'ON' for all functions.
5-28 Specifying Common Settings
Default Settings
Tray A: PRINTER, FAX, and
OTHER
Tray B: COPY
Tray A: PRINTER, FAX, and
OTHER
Tray B: COPY
Tray A and B
A
B
A
B