Canon IMAGERUNNER 2016 Reference Manual page 136

3
OK
4
OK
5
5
OK
6
Stop
5-20 Specifying Common Settings
Press [ ] or [
TONE>, <TX JOB DONE TONE>, <RX JOB DONE TONE>,
<SCAN DONE TONE>, or <PRINT DONE TONE> ➞ press [OK].
AUDIBLE TONES
1.ENTRY TONE
Press [ ] or [
<OFF> for the tone you are setting ➞ press [OK].
If you selected <OFF>, proceed to step 6.
ENTRY TONE
Press [ ] or [
press [OK].
You can select from 1 to 3.
Repeat steps 3 to 5 to set the volume for other tones.
ENTRY TONE
The selected tone is set.
Press [Stop] to return to the Standby display.
] to select <ENTRY TONE>, <ERROR
ENTRY TONE
] to select <ON>, <ERROR ONLY>, or
ENTRY TONE
ON
] to select the volume for each tone ➞
AUDIBLE TONES
1 2.ERROR TONE
ON
1