Switching The Tuner Mode; Dimmer Control; Adjusting Display Contrast; Demonstration Function - Alpine CDA-W560E Owner's Manual

Switching the Tuner Mode

This unit incorporates the MAX TUNE SQ for the highest quality
tuner audio. Moreover, you can choose between three settings to suit
your own personal sound preferences and usage.
1
Press FUNCTION/SETUP to select the SETUP
mode*.
* See "About SETUP" on Page 6.
2
Press / or - to select the TUNER mode.
3
Press -/J / ENT. to switch the TUNER (FM) setting.
NORMAL HI-FI
(Initial setting)
NORMAL: Standard setting
HI-FI: Sound quality priority setting
STABLE: Noiseless priority setting
4
After completing the setting, press FUNCTION/
SETUP to return to the normal mode.
• If you find the sound is very noisy while listening to the tuner in
HI-FI mode, we recommend you change to Normal mode.

Dimmer Control

Set the DIMMER control to AUTO to decrease the illumination
brightness of the unit with the head lights of the vehicle ON.This
mode is useful if you feel the unit's backlighting is too bright at night.
1
Press FUNCTION/SETUP to select the SETUP
mode*.
* See "About SETUP" on Page 6.
2
Press / or - to select the DIMMER mode.
3
Press -/J / ENT. to switch the DIMMER setting.
DIMMER AUTO DIMMER MANUAL
(Initial setting)
4
After completing the setting, press FUNCTION/
SETUP to return to the normal mode.
• This will function only when the illumination cable of this unit is
connected.
26
-EN
STABLE

Adjusting Display Contrast

You can adjust the display contrast for better visibility.
1
Press FUNCTION/SETUP to select the SETUP
mode*.
* See "About SETUP" on Page 6.
2
Press / or - to select the CONTRAST mode.
3
Press -/J / ENT. or turn the Rotary encoder to
adjust the contrast.
Adjustment is possible over levels -6 to +6.
CONTRAST ±0
(Initial setting)
4
After completing the setting, press FUNCTION/
SETUP to return to the normal mode.

Demonstration Function

This unit has a Demonstration feature which simulates the display and
sound functions.
1
Press FUNCTION/SETUP to select the SETUP
mode*.
* See "About SETUP" on Page 6.
2
Press / or - to select the DEMO mode.
3
Press -/J / ENT. to set DEMO ON.
DEMO ON DEMO OFF
(Initial setting)
4
After completing the setting, press FUNCTION/
SETUP and return to the normal mode.
When the demonstration mode is used, be sure to cancel
it when finished.