Blank Skip (B.skip); Scanning Programmes; Programme Sensor - Alpine CDA-W560E Owner's Manual

3
Press / or - to select ON, then press -/J / ENT..
ON OFF
4
To cancel, select REPEAT OFF with the above
procedure.
• The FUNCTION mode will be cancelled when an operation has
not been performed in 10 seconds.

Blank Skip (B.SKIP)

Blank sections on the tape lasting 15 seconds or more are skipped.
1
Press FUNCTION/SETUP to select the FUNCTION
mode.
FUNCTION
mode
2
Press / or - to select B.SKIP mode, then press
-/J / ENT..
The mode that is blinking at the centre of the display is the
selected mode.
3
Press / or - to select ON, then press -/J / ENT..
ON OFF
4
To cancel, select B.SKIP OFF with the above
procedure.
• The FUNCTION mode will be cancelled when an operation has
not been performed in 10 seconds.

Scanning Programmes

The first 10 seconds of each programme on the tape will be played
back in succession.
1
Press FUNCTION/SETUP to select the FUNCTION
mode.
FUNCTION
mode
2
Press / or - to select SCAN mode, then press
-/J / ENT..
The mode that is blinking at the centre of the display is the
selected mode.
3
Press / or - to select ON, then press -/J / ENT..
ON OFF
• The SCAN operation cannot detect blank sections of less than 4
seconds.
• When you have found a desired track for listening, switch the
function OFF with the above procedure.
• The FUNCTION mode will be cancelled when an operation has
not been performed in 10 seconds.
SETUP NORMAL
mode mode
SETUP NORMAL
mode mode
Programme Sensor (P.S.)
1
Press once during tape play to return to the
beginning of the current selection being played.
If you wish to return to the beginning of a selection further
back, press repeatedly until the number of selections you
would like to skip is shown in the display.
The display will show PS-1 with the first press and will
increase by one with each successive press up to PS-9.
The tape indicator will blink showing the direction of your
search.
2
Press once during tape play to advance to
the beginning of the next selection.
If you wish to advance to the beginning of a selection
further ahead, press repeatedly until the number of
selections you would like to skip is shown in the display.
The display will show PS+1 with the first press and will
increase by one with each successive press up to PS+9.
The tape indicator will blink showing the direction of your
search during searching operation.
• The programme sensor feature is functional in the tape play mode
only.
• You can advance to the 9th (max.) programme or return to the 8th
(max.) programme.
15
-EN