Switching The Tuner Mode; Adjusting Source Signal Levels; Subwoofer Control On And Off - Alpine CVA-1014R Owner's Manual

Switching the Tuner Mode

The CVA-1014R/CVA-1014RB/CVA-1014RR
incorporates the MAX TUNE PRO for the highest
quality tuner audio. Moreover, you can choose
between three settings to suit your personal
preferences.
1
When the monitor is open, press and hold
MUTE/SETUP for at least 2 seconds. The
SETUP screen appears.
2
Press preset 4 to activate the RADIO setting
mode. Press preset 4 again to select FM
CONDITION.
3
Press g or f to select the desired setting.
NORMAL: Standard setting
HI-FI: Sound quality priority setting
STABLE: Noiseless priority setting
For any other settings, press preset 4 or another
preset button.
4
After setting is completed, press MUTE/SETUP
to return to normal mode.

Adjusting Source Signal Levels

If the difference in volume level between FM radio
and other sources is too great, adjust the FM
signal level as follows.
1
When the monitor is open, press and hold
MUTE/SETUP for at least 2 seconds. The
SETUP screen appears.
2
Press preset 4 to select the RADIO setting
mode. Press preset 4 again to select FM
LEVEL.
3
Press g or f to select the FM signal level
HIGH or LOW to make the signal levels between
the FM band and other sources closer.
For any other settings, press preset 4 or another
preset button.
4
After setting is completed, press MUTE/SETUP
to return to normal mode.
Other Useful Features

Subwoofer Control On and Off

1
When the monitor is open, press and hold
MUTE/SETUP for at least 2 seconds.
2
Press preset 5 to set to the SYSTEM setting
mode. Press preset 5 again to select the
SUBWOOFER mode.
3
Press g or f to select Subwoofer ON or
OFF.
For any other settings, press preset 5 or another
preset button.
4
After setting is completed, press MUTE/SETUP
to return to normal mode.
NOTES
• Initial mode is "SUBWOOFER ON."
• Set to "SUBWOOFER OFF" unless the subwoofer is
used.
• When the subwoofer is turned on, the subwoofer
output level can be adjusted. For more details, refer to
the Adjusting Volume/Balance/Fader (page 8).
47
-EN