Radio Operation; Switching The Tuner Mode; Manual Tuning - Alpine TDA-7592R Owner's Manual

Radio
SOURCE
g DN

Radio Operation

Switching the Tuner Mode

The TDA-7592R incorporates the MAX TUNE Pro
for the highest quality tuner audio. Moreover, you
can choose between two settings to suit your own
personal sound preferences usage.
1
Press and hold the SETUP button for at least 3
seconds.
2
Press the g DN or f UP button to select
the "HI-FI or NORMAL or STABLE." Each press
of the f UP button changes the modes as
shown:
→ FM-LV → REG → PTY31 → HI-FI/NORMAL/STABLE → AMBER
DEMO ← AUX ← SCR ← MUTE ← BEEP ← SUB ← DIM ←
3
Press the TUNE button to switch the TUNER
mode.
→ HI-FI → NORMAL → STABLE
NORMAL: Standard setting
HI-FI: Sound quality priority setting
STABLE: Noiseless priority setting
NOTES
• The initial setting at the factory is "NORMAL."
• If you find the sound is very noisy while listening to
the tuner in the HI-FI mode, we recommend you
change to the NORMAL mode.
4
When the setting is completed, press the SETUP
button to return to the normal mode.
12
-EN
TUNE BAND
f UP SETUP Preset buttons
(1 through 6)

Manual Tuning

1
Press the SOURCE button until a radio
frequency appears in the display.
2
Press the BAND button repeatedly until the
desired radio band is displayed.
Each press changes the band:
→ FM1 → FM2 → FM3 → MW → LW
3
Press the TUNE button repeatedly until "DX
SEEK" and "SEEK" disappear from the display.
NOTE
The initial mode is DX SEEK.
4
Press the g DN or f UP button to move
downward or upward one step respectively until
the desired station frequency is displayed.
NOTE
The ST indicator appears on the display when a Stereo
FM station is tuned in.