Specifications - Alpine CDA-W560E Owner's Manual

Specifications

FM TUNER SECTION
Tuning Range
Mono Usable Sensitivity
50 dB Quieting Sensitivity
Alternate Channel Selectivity 80 dB
Signal-to-Noise Ratio
Stereo Separation
AM TUNER SECTION
Tuning Range
Sensitivity (IEC Standard)
CD PLAYER SECTION
Frequency Response
Wow & Flutter (% WRMS)
Dynamic Range
Signal-to-Noise Ratio
Channel Separation
TAPE PLAYER SECTION
Tape Speed
Wow & Flutter
Signal-to-Noise Ratio
With Dolby B-TYPE NR
Without Dolby NR
Frequency Response
With Alpine Test Tape
GENERAL
Power Requirement
Power Output
* Primary amplifier ratings per CEA-2006 Standard
• Power output: measured at 4 Ohms and ≤ 1% THD+N
• S/N: 80 dBA (reference: 1 W into 4 Ohms)
Maximum Pre-Output Voltage 2V/10 k ohms
Weight
CHASSIS SIZE
Width
Height
Depth
NOSEPIECE SIZE
Width
Height
Depth
• Due to continuous product improvement, specifications and design
are subject to change without notice.
34
-EN
87.5 – 108.0 MHz
9.3 dBf (0.8 µV/75 ohms)
13.5 dBf (1.3 µV/75 ohms)
80 dB
45 dB
531 – 1,602 kHz
22.5 µV/27 dB
5 – 20,000 Hz (±1 dB)
Below measurable limits
93 dB (at 1 kHz)
105 dB
85 dB (at 1 kHz)
1-7/8 ips (4.8 cm/sec)±0.7%
0.06%WRMS
68 dB
60 dB
30-20,000Hz
14.4 V DC
(11–16 V allowable)
18 W RMS × 4*
2.2 kg (4 lbs. 14 oz)
178 mm (7")
100 mm (3-15/16")
160 mm (6-1/4")
170 mm (6-11/16")
96 mm (3-3/4")
28 mm (1-1/8")