Subwoofer On And Off; Setting The Aux Mode (V-Link); Setting Tone Defeat For External Devices; Turning Mute Mode On/Off - Alpine CDA-W560E Owner's Manual

External Device

Subwoofer On and Off

1
Press FUNCTION/SETUP to select the SETUP
mode*.
* See "About SETUP" on Page 6.
2
Press / or - to select the SUBW. ON or OFF
mode.
3
Press -/J / ENT. to set SUBW. ON.
SUBW. ON SUBW. OFF
(Initial setting)
4
After completing the setting, press FUNCTION/
SETUP to return to the normal mode.
5
Press Rotary encoder to select the SUBW. mode.
SUBW. BALANCE
VOLUME
Press g or f after selecting the Subwoofer mode,
and the subwoofer output phase is toggled "NORMAL
(PHASE 0°)" or "REVERSE (PHASE 180°)."
6
Turn the Rotary encoder within 5 seconds and
adjust the level (0 to +15) of the subwoofer.
• Once the mode is selected, failure to perform an operation within 5
seconds will result in cancellation of the adjustment mode.
• The subwoofer output is a monaural output.

Setting the AUX Mode (V-Link)

You can input TV/video sound by connecting an optional Ai-NET/
RCA Interface cable (KCA-121B) or Versatile Link Terminal (KCA-
410C) to this component.
1
Press FUNCTION/SETUP to select the SETUP
mode*.
* See "About SETUP" on Page 6.
2
Press / or - to select the AUX IN mode.
3
Press -/J / ENT. to set to ON.
AUX IN OFF AUX IN ON
(Initial setting)
• After setting AUX IN to ON, use / or - to select the AUX display
selection, then press -/J / ENT. which will allow setting of the
AUX mode "display."
4
When the setting is completed, press FUNCTION/
SETUP to return to the normal mode.
FADER
DEFEAT
5
Press SOURCE/POWER to select the AUX
(external input) mode.
TUNER TAPE
(*1: Only when the changer is connected)
• When using the Versatile Link Terminal (KCA-410C), you can
connect two external inputs. To select the mode, press BAND on the
unit.

Setting Tone Defeat for External Devices

When inputting external devices to this unit, turning tone defeat on
will bypass EQ and MX, i.e., sound for external devices is output at
the default setting.
1
Press FUNCTION/SETUP to select the SETUP
mode*.
* See "About SETUP" on Page 6.
2
Press / or - to select the INT AUDIO mode.
3
Press -/J / ENT. to set INT AUDIO ON.
INT AUDIO OFF INT AUDIO ON
(Initial setting)
4
When the setting is completed, press FUNCTION/
SETUP to return to the normal mode.

Turning Mute Mode On/Off

If a device having the interrupt feature is connected, audio will be
automatically muted whenever the interrupt signal is received from
the device. This function can be turned ON or OFF from the head unit
by following procedure below.
1
Press FUNCTION/SETUP to select the SETUP
mode*.
* See "About SETUP" on Page 6.
2
Press / or - to select the INT MUTE mode.
3
Press -/J / ENT. to set INT MUTE OFF.
INT MUTE ON INT MUTE OFF
(Initial setting)
4
When the setting is completed, press FUNCTION/
SETUP to return to the normal mode.
*1
CD CHANGER AUX
27
-EN