1.TROUBLESHOOTING FOR THE HARDWARE
Paper jam in the bypass tray
1
Pull out the paper jammed on the bypass tray and
place it again.
If a sheet of paper is stained, folded or torn, replace it with a new one.
Paper jam in the automatic duplexing unit
Be careful not to let your fingers be caught between the equipment and the duplexing unit or automatic
duplexing unit.
This could injure you.
Do not touch the metal portion of the guide plate in the duplexing unit or automatic duplexing unit as it could
burn you.
Do not touch the fuser unit or the metal portion around it.
Since they are very hot, you could be burned or the shock could cause you to get your hand injured in the machine.
1
Open the automatic duplexing unit on the right.
2
Remove the jammed paper raising the paper guide.
3
Lower the paper guide and close the automatic duplexing unit.
Be sure to firmly close both sides of the automatic duplexing unit.
1 TROUBLESHOOTING FOR THE HARDWARE
1
Clearing a Paper Jam
2
21