Paper Jam In The Saddle Stitch Finisher Mj-1106 And The Hole Punch Unit Mj-6103 (Both Optional) - Oki CX4545 MFP Troubleshooting Manual
Multifunctional digital color systems
Hide thumbs
Also See for CX4545 MFP:
- Manual (384 pages) ,
- Management manual (272 pages) ,
- Printing manual (230 pages)
Table of Contents
Advertisement
1.TROUBLESHOOTING FOR THE HARDWARE
9
Close the cover of the Bridge Unit.
10
Close the upper receiving tray of the finisher.
Place your hands on the near and far side of the lever and push to
close the tray until it clicks.
Be careful not to let your fingers be caught between the
finisher body and the upper tray of the finisher.
This could injure you.
The upper receiving tray of the finisher can also be closed by
pressing the right side of the lever.
Paper jam in the Saddle Stitch Finisher MJ-1106 and the Hole Punch Unit MJ-6103 (both optional)
1
Raise the lever and open the upper receiving tray of
the finisher.
2
Open the cover of the Hole Punch Unit when it is
installed.
1 TROUBLESHOOTING FOR THE HARDWARE
Clearing a Paper Jam
29
Advertisement
Table of Contents
Troubleshooting
