Triumph Daytona 675 Owner's Handbook Manual page 93

Adjustment
1 Rebound damping adjuster
The rebound damping adjuster is
located a t t h e bottom of the rear
suspension unit on the left hand side
of the motorcycle.
To adjust the rebound damping
setting, rotate the adjuster clockwise
to increase rebound damping and
anti-clockwise t o decrease.
NOTE
The motorcycle is delivered
from the factory with the
rebound adjuster
position 6.
Maintenance and Adjustment
Compression Damping
Adjustment
I
I
1 Compression damping adjuster
The compression damping adjuster
is situated adjacent t o the rear
suspension unit reservoir.
To adjust the compression damping
setting rotate the slotted adjuster
clockwise
clockwise t o decrease.
NOTE
The motorcycle is delivered
from the factory with the
set at
compression damping set at
position 11.
The rear suspension unit spring
pre-load is not rider adjustable.
Any attempt to adjust the spring
pre-load
dangerous riding condition leading
t o loss of control and an accident.
to increase, or
could result in
I
a