Triumph Daytona 675 Owner's Handbook Manual page 81

Chain Free
Inspection
I
Maximum movement position
1
help prevent injury to the operato
Place the motorcycle on a level
surface and hold it in an upright
position with no weight on it.
Rotate the rear wheel by pushing the
the motorcycle to find the position
where the chain is tightest,
measure the vertical movement of
the chain midway
sprockets.
Maintenance and Adjustment
Movement Chain
Adjustment
The vertical movement of the drive
chain must be in the range
1.57 in (35-40 mm).
I
1 Adjuster bolt
2 Adjuster bolt locknut
3
Loosen the wheel spindle nut.
Release the locknuts on both the left
hand and right hand chain adjuster
bolts.
Moving both adjusters by an equal
amount,
clockwise t o increase chain free
movement and counter clockwise to
and
reduce chain free movement.
When the correct amount of chain
between the
free movement has been set, push
the wheel into firm contact with the
adjuster.
locknuts t o 20 lbf
the
81.1 Ibf ft (110 Nrn).
Free Movement
Rear wheel spindle nut
turn the adjuster bolts
Tighten both
ft (27 Nm)
rear wheel spindle
I
adjuster
and
nut to