Triumph Daytona 675 Owner's Handbook Manual page 103

Caution
Do not adjust the pivot screws as
this will cause
reflector to become detached from
the pivot screw,
irreparable damage
headlight.
Turn the vertical adjustment screws
on each headlight clockwise to raise
t h e beam or anti-clockwise t o lower
t h e beam.
On the right hand headlight turn the
horizontal adjustment
clockwise to move the beam t o the
left or anti-clockwise to move the
beam to the right.
On the left hand headlight turn the
horizontal adjustment
clockwise to move the beam t o the
right or anti-clockwise to move the
beam t o the left.
Switch the headlights off when the
beam settings are satisfactory.
Headlight Bulb Replacement
is not necessary to remove the
I t
headlight when bulb replacement
becomes necessary.
Maintenance and Adjustment
the headlight
leading to
to the
I
screw
screw
To replace a bulb:
Remove the rider's seat.
Disconnect
(black) lead first.
Remove the f o u r screws and remove
the bulb cover from the bulb t o be
replaced.
Disconnect t h e multi-plug from the
bulb retainer.
Detach the bulb retainer from the
headlight assembly by rotating i t
counter-clockwise.
1 Headlight unit
2 Bulb retainer
shown)
bulbs become hot durlng
the battery,
I
(right hand
u
negative