Triumph Daytona 675 Owner's Handbook Manual page 92

Maintenance and Adjustment
Spring Pre-Load Adjustment
The spring pre-load adjusters are
located at the top of each fork.
rotate the adjuster clockwise to
increase pre-load, or anti-clockwise
to decrease pre-load. Always set the
pre-load adjusters such that there
are an equal number of graduation
lines visible on both forks.
NOTE
The motorcycle is delivered
from the factory with the
spring pre-load
position 5.
Rebound Damping
Adjustment
The rebound damping adjusters are
located at the top of each fork.
To change the rebound damping
force, rotate the slotted adjuster
clockwise to increase,
clockwise to decrease. Always count
the turns out from the screwed fully
in position and set both forks to the
same setting.
NOTE
The motorcycle is delivered
from the factory with the
rebound set a t position 6.
Rear Suspension Adjustment
The rear suspension
adjustable for both rebound and
compression damping.
Compression Damping
Adjustment
The compression damping adjuster
is located near the bottom of both
forks, adjacent to the wheel spindle.
set at
1 Compression
adjuster
To change the compression damping
force rotate the slotted adjuster
clockwise
or anti-
clockwise to decrease. Always count
the number of turns out from the
fully screwed in position and set both
forks to the same setting.
NOTE
The motorcycle is delivered
from the factory with the
compression damping set at
position 7.
Rebound Damping
unit is
damping force
to increase, or anti-