Triumph Daytona 675 Owner's Handbook Manual page 75

Coolant Level Adjustment
hot, pressurised coolant will cause
Allow the engine t o cool.
The expansion tank cap can be
removed from the left hand of the
motorcycle, between the rear of the
lower fairing and the frame.
Remove the cap from the expansion
tank, and add coolant
through the filler opening until the
level reaches the 'MAX' mark. Refit
the cap.
NOTE
I f the coolant level is being
checked because
coolant has
also check the level in the
radiator and
necessary.
In
an emergency,
alone can be added to the
cooling system. However,
the coolant
returned to
mixture ratio as soon as
possible.
Maintenance and Adjustment
Coolant Change
Have the coolant changed by an
authorized
accordance
maintenance requirements.
Radiator Hoses
Check the radiator hoses for cracks
o r deterioration, and hose clips for
tightness
scheduled
requirements. Have your authorized
Triumph dealer replace any defective
items.
A year-round type of antifreeze is
installed in the cooling system
when the motorcycle leaves the
mixture
factory.
contains
ethylene glycol, and has a freezing
point of -31°F (-35OC).
Check the radiator grille and fins for
obstructions by insects, leaves or
the
mud. Clean off any obstructions with
overheated,
a stream of low-pressure water.
top-up if
water
must be
the correct
Triumph dealer
with scheduled
in accordance
maintenance
I t is coloured blue,
a solution
in
with
of