Triumph Daytona 675 Owner's Handbook Manual page 32

General Information
The corresponding lights for the
current mode will be illuminated and
the clock will display the selected
-
mode either 'SCALE', 'LEd 3: 'LEd
been selected, n o lights will be
illuminated. See 'Gear Change Light
Modes' on page 26.
I
1 Gear change lights
2 Display screen (SCALE mode
shown)
To scroll through t h e four modes
press the 'Set' button. To set the
gear change lights t o the displayed
mode, press the 'Trip' and 'Scroll'
buttons simultaneously
seconds.
I f the 'OFF' mode is selected a t this
point, the instruments will return t o
their normal mode of operation,
otherwise the gear change lights
limits can now
described below:
1 Gear change lights
2 Display
shown)
I
Setting
Limits
Select the desired gear change light
mode as described above. Press the
'Trip' and
simultaneously for 4 seconds. After
for
4
seconds, t h e tachometer needle will
move round t o the last set position
and the word 'tAcHo' will appear in
t h e clock display. The corresponding
lights for the current mode will also
remain illuminated.
be adjusted as
screen (OFF mode
Gear
Change Light
'Scroll' buttons
4