Triumph Daytona 675 Owner's Handbook Manual page 107

After Washing
Remove the plastic bags and tape,
and clear the air intakes.
Lubricate the pivots, bolts and nuts.
Test the brakes before motorcycle
operation.
Start the engine and run it for 5
minutes. Ensure
ventilation for the exhaust fumes.
Use a dry cloth t o absorb water
residue. Do not allow water to stand
o n the machine as this will lead t o
corrosion.
n accident could result. Clean the
Unpainted Aluminium Items
I t e m s such as brake and clutch
levers must be correctly cleaned to
preserve their appearance.
Use a proprietary
aluminium cleaner which does not
contain abrasive o r caustic elements.
Clean aluminium items regularly, in
particular after use in inclement
weather, where the
must be hand washed and dried
each time the machine is used.
Warranty claims due t o inadequate
maintenance will not be allowed.
Maintenance and Adjustment
Cleaning
System
All parts of the exhaust system o f
your motorcycle must be cleaned
regularly t o avoid a deterioration o f
its appearance. These instructions
can be applied t o chrome, brushed
stainless steel and carbon fibre
adequate
components alike.
NOTE
Washing
Prepare a mixture o f water and mild
soap. Do not use a highly alkaline
soap
commercial car washes because it
leaves a residue.
Wash the exhaust system with a soft
cloth.
scouring pad or steel wool. They will
damage the finish.
Rinse
thoroughly.
brand of
Ensure no soap or water enters the
mufflers.
components
of the
The exhaust system must
be cool before washing to
prevent water spotting.
as commonly
Do not use an abrasive
the exhaust
Exhaust
found a t
system