Canon CLC 1120 Service Handbook page 201

CLEAR
Initializes the RAM, and resets the jam/ error history.
Level 3
ERR Use it to reset an error code (E000, E005, E008,
E020, E717, E719).
Using the Item
1) Select the item (to highlight), and press the OK
key.
2) Turn off and then on the power switch.
DC-CON Use it to initialize the RAM of the DC-CPU on the
CPU PCB.
Using the Item
1) Select the item (to highlight), and press the OK
key.
2) Turn off and then on the power switch.
R-CON Use it to initialize the RAM of the R-CPU on the
CPU PCB.
1) Select the item (to highlight), and press OK key.
2) Turn off and then on the power switch.
MMI-COPY Use it to initialize the RAM of the PANEL-CPU on
the CPU PCB.
Using the Item
1) Select the item (to highlight), and press the OK
key.
2) Turn off and then on the power switch.
SERVICE Use it to reset the backup data of service mode.
Using the Item
1) Select the item (to highlight), and press the OK
key.
2) Turn off and then on the power switch.
JAM-HIST Use it to reset the jam history.
Using the Item
1) Select the item (to highlight), and press the OK
key.
• The jam history will be reset.
ERR-HIST Use it to reset the error history.
Using the Item
1) Select the item (to highlight), and press the OK
key.
• The error history will be reset.
E354-CLR ---
E355-CLR ---
Description
CHAPTER 4 SERVICE MODE
COPIER>FUNCTION
Remarks
Be sure to turn off and then
on the power switch.
Note: 'E020' is indicated only
when the detail code is
'xxE0'.
Be sure to turn off and then
on the power switch.
Be sure to turn off and then
on the power switch.
Be sure to turn off and then
on the power switch.
Be sure to turn off and then
on the power switch.
4-115