Canon CLC 1120 Service Handbook page 160

CHAPTER 4 SERVICE MODE
4-74
NEGA-B -100 to +100
NAGA-G -100 to +100
NEGA-R -100 to +100
POSI-B -100 to +100
POSI-G -100 to +100
POSI-R -100 to +100
N-LMT 0 to 255
N-G-LMT 0 to 255
P-LMT 0 to 255
P-G-LMT 0 to 255
OHP-LMT 0 to 255
P-DA-XS -99 to +99
P-DA-XE -99 to +99
P-DA-YS -99 to +99
P-DA-YE -99 to +99
N-DA-XS -99 to +99
adjustment of the target value for shading
correction when copying negative film with
the projector in use (a higher setting darkens
Y area)
adjustment of the target value for shading
correction when copying negative film with
the projector in use (a higher setting darkens
M area)
adjustment of the target value for shading
correction when copying negative film with
the projector in use (a higher setting darkens
C area)
adjustment of the target value for shading
correction when copying positive film with
the projector in use (a higher setting darkens
Y area)
adjustment of the target value for shading
correction when copying positive film with
the projector in use (a higher setting darkens
M area)
adjustment of the target value for shading
correction when copying positive film with
the projector in use (a higher setting darkens
C area)
change of the limit for the projector lamp in
negative normal mode with the projector in
use
change of the limit for the projector lamp in
negative normal mode with the projector in
use
change of the limit for the projector lamp in
positive normal mode with the projector in
use
change of the limit for the projector lamp in
positive normal mode with the projector in
use
change of the limit for the projector lamp in
transparency mode with the projector in use
adjustment of frame erasing width for
positive film with the projector in use (in
units of 0.6 mm; standard: 24)
adjustment of frame erasing width for
positive film with the projector in use (in
units of 0.6 mm; standard: 8)
adjustment of frame erasing width for
positive film with the projector in use (in
units of 0.6 mm; standard: 32)
adjustment of frame erasing width for
positive film with the projector in use (in
units of 0.6 mm; standard: 24)
adjustment of frame erasing width for
negative film with the projector in use (in
units of 0.6 mm; standard: 50)