Canon ColorPASS-Z20e Service Manual page 43

The display window screens and icons are:
Alert Status If there is a problem during printing or processing, the Alert Status
Print Status
RIP Status
Info Status The Info Status screen displays information about the server's current
Functions
Network
COPYRIGHT© 2000 CANON INC.
screen is activated, displaying an error message.
For information on error messages, see the Printing Guide.
When the ColorPASS is printing, the Print Status screen is activated.
This screen displays the following:
Cancel Job—Press the top line selection button to cancel the job cur-
rently printing.
User name—The name of the user who sent the job that is currently be-
ing processed.
Pages/Total—The number of copies of the current page that have been
printed so far, and the total number of copies of this page that were re-
quested.
When the ColorPASS is processing a job, the RIP Status screen is acti-
vated. This screen displays the following:
Cancel Job-Press the top line selection button to cancel the job cur-
rently processing. The ColorPASS cancels the job before printing be-
gins.
Document name-The name of the document currently processing.
User name—The name of the user who sent the job that is currently be-
ing processed.
Kilobytes—The amount in kilobytes of the job that has been processed
so far.
activity, and software version. This screen is always active, and it ap-
pears in the display window when no other screen is selected. It dis-
plays the following information:
Server Name—The ColorPASS name as it is configured in Setup.
Status—The current status of the ColorPASS. The ColorPASS status
can be: Idle, Initializing, Busy, Processing, or Printing.
Number of MB—The space in megabytes available on the ColorPASS
hard disk.
Version—The system software version running on the ColorPASS.
The Functions screen also is always active, but it appears in the display
window only when the user has pressed the Menu button to select it.
Use the up and down buttons to scroll through the list of menu com-
mand options. Press the line selection button to the right of a command
to select it.
The Network icon appears in the bottom left corner of the display win-
dow when the ColorPASS is communicating over the network. The
Network icon can appear while any screen is displayed.
2000 2000 2000 ColorPASS-Z40e/Z20e REV.0 AUG. 2000
CHAPTER 3 INSTALLATION
3-11