Checking Scanning And Printing - Canon ColorPASS-Z20e Service Manual

CHAPTER 5 TROUBLESHOOTING
6. Examine the quality of the Test Page from the copier.
The Test Page confirms that the ColorPASS print engine is functional and that the con-
nection between the ColorPASS and the copier is good. The next step is to check the
ColorPASS Test Scan/Print function.

3.1.2 Checking Scanning and Printing

The Test Scan/Print function scans whatever is placed on the copier glass and prints it to
the copier. This test can be used to check the scanning capabilities of the ColorPASS. You
can compare the original with the output to make sure the connection between the
ColorPASS and the copier is working properly.
a. To Run Test Scan/Print
1. Place the document that you want to scan on the copier glass.
2. At the Idle screen, press the menu button once to display the Functions menu.
3. Select Run Diagnostics from the Functions menu.
4. At the Diagnostics screen, select Test Scan/Print.
The message Scanning from copier and printing.... is displayed.
5. When the ColorPASS is finished printing, compare the output from the copier to the
original.
5-14
Print Pages
Suspend Printing
Resume Printing
Shut Down
Functions
Clear Server
Run Setup
Run Diagnostics
Calibration
Functions
Test Scan/Print
Test I/F board
Functions
COPYRIGHT© 2000 CANON INC.
Use the line selection
button to the right to
select Run Diagnostics.
F05-301-02
Select Test Scan/Print
F05-301-03
2000 2000 2000 ColorPASS-Z40e/Z20e REV.0 AUG. 2000