BODY PANELS
- Remove the 2 fixing bolts (1).
- Remove the front shield panel (2).
Removal of the rear shield panel.
Procedure 10.
- Removal of the lower side fairings (see
procedure 4).
- Removal of the front top cover panel (see
procedure 7).
- Remove the footboard mat.
- Remove the ingnition switch trim.
- Remove the 3 fixing screws (1) located on
each side of the vehicle.
- Remove the fixing screw (2) located on each
side of the vehicle.
- Remove the 2 fixing bolts (3).
- Remove the screw of the utility hanger (4).
- Remove the utility hanger.
- Remove the rear shield panel.
Removal of the under body panel.
Procedure 11.
- Removal of the lower side fairings (see
procedure 4).
- Removal of the front top cover panel (see
procedure 7).
- Remove the 3 fixing screws (1) located on
each side of the vehicle.
- Open the front shield panel.
- Remove the 3 nuts and the screw of the
underbody panel.
- Remove the bottom panel (2).
20
Reproduction or translation, even partial, is forbidden without the written consent of Peugeot Motocycles
2
2
1
2
1
1
4 4
1
1
3