Removal Of The Fork; Replacing The Bearings Of The Steering System - PEUGEOT V-Clic Workshop Manual

Reassembly:
- Install the springs (3) as shown.
- Install the brake pads (4) oriented as shown
(flat side (5) oriented towards the rear of the
yoke).
Note: When refitting the brake pads, push
the piston all the way into its hou-
sing.
Note: After refitting, actuate the brake
levers several times to bring the
brake pads against the brake disc.

Removal of the fork.

Replacing the bearings of the steering
system.
- Removal of the front wheel (see page 29).
- Removal of the front mudguard (see
procedure 8).
- Removal of the calliper (see page 30).
- Removal of the front top cover panel (see
procedure 7).
- Remove the 3 fixing bolts (1).
- Remove the fastening screw (2).
- Remove the handlebar front and rear covers.
- Remove the handlebars from the fork tube.
- Remove the handlebars from the fork tube.
- Remove the steering locknut (1) (1).
- Remove:
- The lock washer (2).
- the adjustable cone (3).
- Remove the fork.
- Remove the balls.
Reproduction or translation, even partial, is forbidden without the written consent of Peugeot Motocycles
MISCELLANEOUS OPERATIONS
3
5
2
1
2
4
1
3
31