Cycle Part; Standard - PEUGEOT V-Clic Workshop Manual

TIGHTENING TORQUES

Cycle part

Front wheel spindle.
Rear wheel spindle nut.
Linkrod to engine pivot.
Linkrod to frame pivot.
Shock absorber top mount.
Shock absorber bottom mount.
Exhaust to cylinder head mounting nut.
Exhaust to casing mounting bolt.
Upper cone.
Steering locknut.
Front brake caliper.
Front brake disc.
Handle bar.

Standard.

Nut and bolt 5 mm diameter.
Nut and bolt 6 mm diameter.
Nut and bolt 8 mm diameter.
Nut and bolt 10 mm diameter.
Nut and bolt 12 mm diameter.
10
Reproduction or translation, even partial, is forbidden without the written consent of Peugeot Motocycles
5.3 m.daN
12 m.daN
8 m.daN
9.8 m.daN
2.9 m.daN
2.9 m.daN
1.8 m.daN
2.3 m.daN
Hand tightened
3 m.daN
2.6 m.daN
2.3 m.daN
4.9 m.daN
0.4 m.daN
0.9 m.daN
1.2 m.daN
2.6 m.daN
3.9 m.daN