Removal Of The Front Mudguard; Removal Of The Front Shield Panel - PEUGEOT V-Clic Workshop Manual

Removal of the front mudguard.

Procedure 8.
- Disconnect the speedometer driver control
cable.
- Remove the wheel.
- Remove the fixing screw (1) located on each
side of the vehicle.
- Remove the front part of the mudguard (2) by
unclipping it from the holder (3).
- Remove the 2 fixing bolts (4).
- Remove the rear part of the mudguard and its
holder.

Removal of the front shield panel.

Procedure 9.
- Removal of the lower side fairings (see
procedure 4).
- Removal of the front top cover panel (see
procedure 7).
- Removal of the front mudguard (see
procedure 8).
- Remove the 6 fixing bolts.
Reproduction or translation, even partial, is forbidden without the written consent of Peugeot Motocycles
2
4
BODY PANELS
1
3
19