Removal of the front top shield panel
Procedure 4.
- Remove the front top cover panel.
- 3 plastic screws.
- Remove the front upper shield panel.
• 4 plastic screws.
- Disconnect the lighting system connection.
Removal of the rear shield panel
Procedure 5.
- Remove the handlebar fairings. See:
Procedure 3. page 22.
- Remove the front upper shield panel. See:
Procedure 4. page 23.
- Remove the rear shield panel.
• 4 washer head screws. Ø6 mm (A).
• 1 screwØ6 mm (B).
Reproduction ou traduction, même partielle, interdite sans autorisation écrite de Peugeot Motocycles
A
A
BODY PANELS
B
23