Install Thermidistat Control - Bryant PREFERRED T6-PRH-A Installation Instructions & Replacement Parts List

Preferred series thermidistat programmable / non-programmable control
Hide thumbs Also See for PREFERRED T6-PRH-A:
Table of Contents

Advertisement

Exposed to direct light or heat from a lamp, sun, fireplace, or other
S
temperature- -radiating objects which could cause a false reading.
Close to or in direct airflow from supply registers and return- -air regis-
S
ters.
In areas with poor air circulation, such as behind a door or in an al-
S
cove.
Installer should determine whether control will be installed as single- -piece or
two- -piece. In single- -piece configuration, as many as 14 wires may need to run
to wall mounting location for connection to the control. In two- -piece
configuration, the Display Module and Equipment Control Module are
connected by two wires.

Install Thermidistat Control

WARNING
!
ELECTRICAL OPERATION HAZARD
Failure to follow this warning could result in personal injury
or death.
Before installing Thermidistat Control, turn off all power to
equipment. There may be more than 1 power disconnect.
10

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Preferred t6-nrh-aA07045A07044

Table of Contents