Xerox WorkCentre 7120 User Manual page 56

Printing
• Labels
• Heavyweight labels
• Pre-printed
• Envelope
• Gloss
• Gloss Reload
• Heavyweight gloss
• Heavyweight gloss reload
Tray 5 (Bypass Tray) accepts a maximum of approximately 50 sheets of 80 g/m² paper.
Tray 5 (Bypass Tray) accepts the following range of paper sizes: from A6, 100 x 148 mm (3.9 x 5.8 in.)
to A3, 297 x 420 mm (11 x 17 in.).
The following custom paper sizes are also supported: X width between 98 and 432 mm (3.8 x 17 in.), and Y
length between 89 and 297 mm (3.5 x 11.6 in.). Custom paper sizes can be specified in 1-mm increments.
Tray 5 (Bypass Tray) accepts paper weights from 60 g/m² to 216 g/m².
To load paper in Tray 5 (Bypass Tray):
1. Open Tray 5 by rotating it outward. For larger paper, pull the extension straight out until it stops.
2. Insert the paper either long edge or short edge first. Larger paper sizes can only be fed short edge first.
56 WorkCentre 7120 Multifunction Printer
User Guide
wc7120-102
wc7120-024