Xerox WorkCentre 7120 User Manual page 97

4. Use the alphanumeric keypad on the control panel to enter the number of copies. The number of
copies appears in the upper-right corner of the touch screen.
• To correct the number of copies entered using the alphanumeric keypad, press the C button,
then reenter the number.
• To stop a copy job, press the red Stop button on the control panel. On the touch screen, touch
Resume to continue the job, or Cancel to cancel the job completely.
5. If desired, change the copy settings. For details, see
6. Press the green Start button on the control panel.
Adjusting Copy Options
WorkCentre 7120 Multifunction Printer
Copying
on page 98.
97
User Guide