Copying
Adjusting the Color Balance
If you have a color original, you can adjust the balance of the printing colors between cyan, magenta,
yellow, and black before you print your copy.
To adjust the color balance:
1.
Touch Copy on the touch screen, then touch the Image Quality tab.
2.
Touch Color Balance.
3.
To adjust the density levels of all four colors:
Select Basic Color on the Color Balance window.
a.
To adjust the level for each color, touch its pointer, then move it toward + or –.
b.
4.
To adjust the highlight, midtone, and shadow density levels by color:
a.
Touch Advanced Color.
b.
Touch the desired color.
c.
To adjust the levels for highlights, midtones, and shadows, touch the pointer, then move it
toward + or –.
d.
For additional color adjustments, repeat steps 4b and 4c.
5.
Touch Save.
Adjusting the Color Shift
If you have a color original, you can adjust the hue of the copy colors.
Note:
This feature is only available when the output color is set to Auto Detect or Color.
To adjust the color shift:
1.
Touch Copy on the touch screen, then touch the Image Quality tab.
2.
Touch Color Shift. The Original Color bar represents the colors of the original document. The Copy
Color bar represents the copy colors.
3.
Touch one of the five buttons from Minus to Plus to select the desired color shift.
4.
Touch Save.
Layout Adjustments
Use the Layout Adjustment tab to change the following settings:
•
Book Copying
on page 105
•
2-Sided Book Copying
•
Specifying the Original Size
•
Erasing the Edges of a Copy
•
Shifting the Image
•
Rotating the Image
•
Inverting the Image
•
Specifying the Orientation of the Original
104
WorkCentre 7120 Multifunction Printer
User Guide
on page 105
on page 106
on page 106
on page 107
on page 107
on page 108
on page 108