Assembling The Led Cover, Power Supply Actuator, Sub Pcb Assy And Top Cover - Brother PT-2420PC Service Manual

[ 6 ]

Assembling the LED Cover, Power Supply Actuator, Sub PCB ASSY and Top Cover

(1) Assemble the LED cover and power supply actuator onto the top cover.
Fig. 3.1-26 Assembling the LED Cover and Power Supply Actuator
(2) Set the sub PCB ASSY onto the two positioning pins on the top cover and secure the one
screw to assemble the sub PCB ASSY onto the top cover.
Note: When assembling the sub PCB ASSY onto the top cover, ensure not to break the two
(3) Fix the three harnesses of the sub PCB ASSY into the slits A on the top cover.
Top cover
positioning pins on the top cover.
Slits A
Fig. 3.1-27 Assembling the Sub PCB ASSY
Screw
Top cover
III-18
Power supply actuator
LED cover
Sub PCB ASSY
Positioning pins