Appendix 1.4 Running The Eeprom Initialization Program - Brother PT-2420PC Service Manual

Appendix 1.4 RUNNING THE EEPROM INITIALIZATION PROGRAM

(1) Turn on your computer.
(2) After the OS has started up, press the ON/OFF switch of the PT-2420PC to turn it on.
(3) Double-click the EEPROM initialization program named PT15RESET.EXE to start it up.
The following window will appear.
Note: If the dialog "The Port Monitor not loaded!" displays, install the PT-2420PC printer
(4) Open the Port list, select the port that includes the current serial number* and character
string "PT-2420PC," and then click the OK button.
(*Lower nine digits of the serial number printed on the nameplate of the PT-2420PC if the
serial number has been written, or 0000000001 if no serial number has been written)
The following window will appear.
(5) Click the Reset button.
Note: If "NG" appears, click the End button to abort the EEPROM initialization program and
(6) Click the End button to terminate the program.
(7) Turn the PT-2420PC off and unplug the USB interface cable.
driver, restart your computer, and go back to step (2) above.
go to the recovery procedure given in Appendix 1.5.
9