Assembling The Chassis Assy - Brother PT-2420PC Service Manual

[ 5 ]

Assembling the Chassis ASSY

(1) Release the roller release lever to insert the chassis ASSY into the middle cover by aligning
it with the slit, one boss and two ribs on the middle cover.
Warning: Take care not to get injured in your fingers with the cutter blade.
Note: When assembling the chassis ASSY onto the middle cover, make sure that there is no
(2) Secure the chassis ASSY with the two screws.
Caution: When securing the chassis ASSY, make sure not to catch the harnesses of the
Roller release lever
gap between them.
switch ASSY and DC motor.
Middle cover
Fig. 3.1-25 Assembling the Chassis ASSY
Screws
Ribs
III-17
Chassis ASSY
Slit
Boss