(6)
Bind the six harnesses of the switch ASSY at the center of the harness with the fixing tape.
Note 1: Use the transparent tape whose width is 12mm to bind the harness.
Note 2: When the harnesses have been already bound with the tape, check that they are
bound correctly. If not, bind the harnesses again with a new tape.
(7)
Secure the FG harness onto the chassis ASSY with the one screw.
* The stepped side
should be at the top.
Middle cover
Fixing tape
Fig. 3.1-33 Assembling the Main PCB ASSY (5)
FG harness
Chassis ASSY
Fig. 3.1-34 Assembling the Main PCB ASSY (6)
III-22
Middle cover
Main PCB ASSY
Screw
Main PCB ASSY