If Any Error Message Is Displayed On The Computer Screen - Brother PT-2420PC Service Manual

4.4 IF ANY ERROR MESSAGE IS DISPLAYED ON THE COMPUTER SCREEN

Check the error message table given below and take any necessary action.
If you press the Detail button when an error message is displayed, then the Monitor Help will start
and show Advice.
If this message appears on the computer
screen:
No errors.
Cassette not installed.
Buffer full error in the P-touch.
P-touch tape cutter not operating.
Cannot change cassette while printing.
Appropriate cassette not installed.
P-touch may have invalid data in memory.
Connected P-touch is not PT-2420PC.
Wrong AC adapter connected.
Do this:
—
Load a tape cassette specified in the P-touch monitor
screen and click the Resume button.
Turn the P-touch off and then on. Click the Resume
button in the P-touch monitor screen.
(1) Turn the P-touch off and unplug the AC adapter
from the P-touch.
(2) Remove the jammed tape and print again.
Take extra care not to get injured in your fingers with
the cutter blades.
Turn the P-touch off and then on. Click the Resume
button in the P-touch monitor screen.
Load a tape cassette specified in the P-touch monitor
screen and click the Resume button.
Turn the P-touch off and then on.
Choose the correct printer port specifying the model
name, PT-2420PC.
If more than one P-touch is connected to your computer
via the USB interface, then you need to choose the
correct printer port specifying the model name and
serial number (e.g., "PTUSB (PT-2420PC-
xxxxxxxxx):"), instead of the default printer
port"PTUSB:." Where, xxxxxxxxx is a serial number.
Use an AC adapter exclusively designed for the P-
touch.
IV - 3