Table of Contents
Advertisement
Barcode Labels
The printer allows you to print Code 39 barcode labels. Barcode heights are available in inches or
mm.
Human Readable—Barcodes will automatically print human readable text in 10-point font size. The
human readable text will be centered and positioned below the barcode.
Barcodes are selectable on a line-by-line basis. Text and barcodes cannot be combined on the same
line.
LINE:01
FONT:20 pt
To designate a line or lines as a barcode, press
toggles the barcode function off.
Note: There are some data types such as symbols that cannot be entered or printed while
in barcode mode .If you try to enter this type of information while in barcode mode, you
will receive this error message: Invalid Character.
To change barcode height:
1. Press
2. Press
[NEXT],
inches or mms.
Barcode Height: ¼"
To change the barcode height unit, you must change the label units. See Units on page
19.
3. Select a barcode height by pressing one of the softkeys.
•
For inches, heights available are
•
For mm, heights available are
4. Press
such with human readable text centered below.
24
Gen
.
and then
. The display shows the current barcode height in either
[BAR]
[1/4], [1/2], [3/4], or [1]
[6.4], [12.7], [19.1], or [25.4].
. When you print the label, the line(s) designated as barcode with print as
A barcode symbol in the
status bar (on the display
screen) indicates that a
line is designated as a
barcode.
+
. Pressing this combination again
User's Manual
Advertisement
Table of Contents
