Table of Contents
Advertisement
Barcode
The printer supports Code 39 and Code 128 barcode symbology. You can use either Banner
Landscape or Flag label type to insert a barcode. (See
Type.)
Barcode data can be displayed in the same line as other data (text or symbols). Barcode data on the
same line as text will not overwrite the text already on the line but will be placed next to it.
Note: You cannot change the characteristics of the barcode except the font size. The human
readable text is placed below the barcode and cannot be removed. The size of the barcode
changes with the font size of the human readable text.
Add a Barcode
Barcode creation is only available for select ASCII characters, as shown in Appendix B on
page
80.
To add a barcode:
1. Position the cursor where you want to add the barcode.
2. Press Barcode
3. Choose the barcode symbology (39 or 128) and press Enter
4. Enter the barcode data.
Note: To change the font size, press FONT SIZE, select desired size, press Enter.
The barcode displays on the screen as a rectangle around the barcode data. To exit out of the barcode
data:
5. Press the right navigation key to move off the barcode.
Entering barcode data
(cursor inside barcode)
M210/M210-LAB User Manual
page 50
for information on changing the Label
.
Cursor moved off the barcode data
.
40
Advertisement
Table of Contents
