Table of Contents
Advertisement
Creating Boldface Text
Boldface text is created on a line-by-line basis. To create a boldface line of text:
1. Place your cursor anywhere in the line of text.
2. Press
.
3. Press [BOLD].
Press the Bold softkey to toggle bold on and off on a line-by-line basis. When Bold is toggled
to ON, it stays bold until OFF is selected.
4. Press
.
Symbols
The IDXPERT
Handheld Labeler offers a variety of symbols in these categories: Refer to
TM
Appendix C , Symbol Library for a list of symbols available for printing within each category.
•
Electrical/Voice Data
•
Greek
•
Mandatory/PPE
•
Warning
To select a symbol:
1. Place your cursor anywhere in the line of text.
2. Press
A list of symbol categories appears on the display screen:
Electrical/Voice Data
Greek
Mandatory/PPE
Warning
.......
3. Press
to select the desired symbol category.
The symbols appear, one at a time, for the category selected.
4. Use the softkey arrows or the arrows (up/down) on your keypad to scroll through the symbols
in the selected category.
5. Press
to select the desired symbol.
The symbol will appear on the display screen at the current cursor position. Some symbols will
appear as a generic character symbol
Symbols can be printed in all font sizes. See the section on Font Sizes on page 12 for instructions on
changing font sizes.
User's Manual
+
.
Use the softkey arrows or the
arrows (up/down) on your
keypad to scroll through the
symbol categories.
on the display, but will appear as intended when printed.
•
Prohibition
•
Fire/First Aid
•
Arrows & Misc.
13
Advertisement
Table of Contents
