Material Cartridges; Cartridges Available For Your Idxpert; Handheld Labeler - Brady IDXPERT User Manual

Material Cartridges

Thanks to innovative smart-cell technology, the IDXPERT
automatically adjusts to it, saving setup time and effort.
Note: Most label formatting default settings are based on the cartridge installed in the
printer. Please see the chapters on formatting later on in this manual for information on
changing the default settings.
Note: When you install a cartridge that is a different type than the previously installed
cartridge, you must press
smart-cell label format settings.

Cartridges available for your IDXPERT

Material Description
B-580 Indoor/Outdoor Vinyl
B-342 3:1 Heat-Shrink Polyolefin
B-427 Self-laminating Vinyl
B-498 Vinyl Cloth
(Repositionable)
B-499 Nylon Cloth
(Permanent)
B-428 Metalized Polyester
B-461 Self-laminating Polyester
B-488 Matte Polyester
B-483 Ultra Aggressive Glossy
Polyester
B-422 Glossy Polyester
6
printer recognizes the label material and
TM
+ in order for the printer to read the new

Handheld Labeler

TM
Applications
Pipemarkers, panel and switch ID, equipment ID, small
safety signs, asset ID, bar code labels
Colored supplies and printing
Wire and cable marking (heat shrink sleeves)
Wire and cable marking (self-laminating)
Wire and cable marking (general adhesive), component
marking, terminal blocks, general laboratory ID
Wire and cable marking (general adhesive), component
marking, terminal blocks, general laboratory ID
Rating plate, product and asset ID
Laboratory ID, self-laminating vial, tube, and slide ID
Withstands liquid nitrogen, freezer, autoclave, hot water
bath, centrifuge
Laboratory ID, slides, plates, bottles, and general
laboratory ID
Withstands Xylene, DSMO, ethanol, freezer, autoclave,
hot water bath
General labeling, powder coated surface ID
Component marking, electrical outlet and patch panel ID
User's Manual