Loading Material; Loading Labels Or Continuous Media From Roll; Positioning The Media Roll On The Roll Retainer - Brady BP-PR300+CS Operator's Manual

4

Loading Material

2 Loading Material
Notice!
For adjustments and simple installation work, use the accompanying Allen key located
in the upper section of the print unit. No other tools are required for the work described
here.
2.1

Loading Labels or Continuous Media from Roll

2.1.1 Positioning the Media Roll on the Roll Retainer

Fig: 5 Loading media from roll
1. Open cover (13).
2. Turn ring (5) counterclockwise, so that the arrow (6) points to the symbol , and thus release the mar-
gin stop (4).
3. Remove the margin stop (4) from the roll retainer (3).
4. Load label roll (2) on the roll retainer (3) in such a way that the labels can be inserted into the print-
head in the right position. The printing side of the labels must be visible from above.
5. Re-mount the margin stop (4) onto the roll retainer (3). Push the margin stop (4) until both margin
stops (1, 4) touch the label roll (2) and a clear resistance is encountered.
6. Turn ring (5) clockwise, so that the arrow (6) points to the symbol , and thus fix the margin stop (4) on
the roll retainer (3).
Fig: 6 Margin stop unfixed (left) and
fixed (right)
13