Printing The Time/Date Stamp; Units - Brady IDXPERT User Manual

Printing the Time/Date Stamp

Print Time
To print the time stamp, press
label, the time symbol
will receive this error message: Cannot Fit.
The time prints on your label in 12-hour, AM/PM format. For example, 9:30 AM.
Print Date
To print the date stamp, press
the date symbol appears in the place in which you have your cursor. If it does not fit, you will
receive this error message: Cannot Fit.
The date prints on your label in dd/MON/yy format. For example, 22/OCT/03.
Note:. The time and date stamp reflects real time. Therefore, the time and date printed
on a label reflects the time at printing.

Units

The printer allows you to view both label measurements and font sizes in a variety of units. To
change default units:
1. Press .
2. Press , and then
[NEXT]
3. Select default units. The display shows the current unit settings.
Label Units: Inches
Font Units: Points
•
To change the default unit for label measurements, press
.
[MM]
•
To change the default unit for fonts, press
Inches, millimeters, and points refer to the height of a character.
4. Press
.
User's Manual
+
appears in the place in which you have your cursor. If it does not fit, you
+
.
[UNIT]
(Insert Time). If the time stamp fits on your
(Insert Date). If the date stamp fits on your label,
[LABL], then
press
[FONT], then [POINT], [INCH], or [MM]
press
[INCH], or
.
19